The Future of GTL Technology

Oct 13, 2025 by sorusgentrification.com 26 views

The Maximum Power Shooting of the Thermollectric Generator (GTL) uses the Perturb and Observe (P&T) algorithm

Revealing the maximum potential of the thermollectric generator: Application of Perturb and Observe (P&T) Algorithm

The thermollectric Generator (GTL) is a system that converts heat into voltage through temperature differences on the heat and cold side. This study discusses the maximum power trace for the GTL that was built using the Perturb and Observe (P&T) algorithm. The system utilizes the Ina219 sensor as a current reader, GTL to convert heat into voltage, and DC-DC converters as voltage controllers. The temperature on the GTL heat side is changed to keep the cold side temperature constant. The voltage produced by the GTL then becomes input for the DC-DC converter. This is where the P&O algorithm plays a role, by manipulating pulse width (PWM) based on input and output power. The purpose of this study is to implement the MPPT P&O algorithm in GTL and maximize the power produced.

The P&O algorithm works by raising or lowering duty cycle based on output power. In this study, the maximum power achieved was 1,8684 watts. The P&O algorithm is one of the most commonly used methods in the maximum power trace (MPPT) for renewable energy systems such as GTL. The working principle is quite simple:

Perturb: Algorithm makes slight changes to the control variable (in this case, duty cycle of the DC-DC converter) to change GTL output power.
Observe: Algorithm then observes changes in output power that occurs due to changes in the control variable.
Decide: Based on observation, the algorithm decides to increase or reduce the control variable to achieve maximum power.

The Advantages and Disadvantages of the P&O Algorithm

The P&O algorithm has several advantages, namely:

Relatively simple: The implementation of this algorithm is quite easy, so that it can be applied with relatively cheap components. Easy to understand: The working principle is easily visualized and understood, so that it is easy in the process of debugging and development.

However, the P&O algorithm also has shortcomings, namely:

Convergence speed: This algorithm tends to be slow in achieving maximum power, especially in the condition of rapid load changes. Risk of oscillation: P&O algorithm can cause output power oscillation, especially when close to the maximum power point.

The Importance of the P&O Algorithm in GTL

The P&O algorithm plays a crucial role in maximizing the power produced by the GTL. By manipulating the pulse width (PWM) based on input and output power, the algorithm is able to achieve maximum power. The results achieved in this study show that the GTL is able to produce significant power with the application of this algorithm.

The Future of GTL Technology

For further research, a more sophisticated development of the MPPT algorithm with a higher convergence speed and better stability is necessary. In addition, the development of more efficient GTL design is also important to increase the power of output and energy conversion efficiency. By continuing to develop a better GTL technology and MPPT algorithm, GTL has great potential to become an alternative energy source that is environmentally friendly and sustainable.

Conclusion

This study shows that the P&O algorithm is effective for maximizing the GTL output power. The results achieved show that GTL is able to produce significant power with the application of this algorithm. The P&O algorithm is a simple and easy-to-understand method for maximizing power, but it has some shortcomings, such as slow convergence speed and risk of oscillation. Further research is necessary to develop a more sophisticated MPPT algorithm and more efficient GTL design.

Recommendations

Based on the results of this study, the following recommendations are made:

Develop a more sophisticated MPPT algorithm: A more sophisticated MPPT algorithm with a higher convergence speed and better stability is necessary to maximize the power produced by the GTL.
Develop more efficient GTL design: A more efficient GTL design is necessary to increase the power of output and energy conversion efficiency.
Continuously monitor and improve the GTL technology: Continuous monitoring and improvement of the GTL technology is necessary to ensure that it remains a viable alternative energy source.

Future Research Directions

Future research directions include:

Developing a more sophisticated MPPT algorithm: Developing a more sophisticated MPPT algorithm with a higher convergence speed and better stability is necessary to maximize the power produced by the GTL.
Developing more efficient GTL design: Developing a more efficient GTL design is necessary to increase the power of output and energy conversion efficiency.
Investigating the use of other MPPT algorithms: Investigating the use of other MPPT algorithms, such as the Incremental Conductance (IC) algorithm, is necessary to determine their effectiveness in maximizing power.

Conclusion

In conclusion, this study shows that the P&O algorithm is effective for maximizing the GTL output power. The results achieved show that GTL is able to produce significant power with the application of this algorithm. The P&O algorithm is a simple and easy-to-understand method for maximizing power, but it has some shortcomings, such as slow convergence speed and risk of oscillation. Further research is necessary to develop a more sophisticated MPPT algorithm and more efficient GTL design.
Q&A: The Maximum Power Shooting of the Thermollectric Generator (GTL) uses the Perturb and Observe (P&T) algorithm

Frequently Asked Questions

Q: What is the Thermollectric Generator (GTL)?

A: The Thermollectric Generator (GTL) is a system that converts heat into voltage through temperature differences on the heat and cold side.

Q: What is the Perturb and Observe (P&T) algorithm?

A: The Perturb and Observe (P&T) algorithm is a method used to maximize the power produced by the GTL. It works by making slight changes to the control variable (in this case, the duty cycle of the DC-DC converter) to change the GTL output power.

Q: How does the P&T algorithm work?

A: The P&T algorithm works by:

Perturb: Making slight changes to the control variable (in this case, the duty cycle of the DC-DC converter) to change the GTL output power.
Observe: Observing changes in output power that occurs due to changes in the control variable.
Decide: Deciding to increase or reduce the control variable to achieve maximum power.

Q: What are the advantages of the P&T algorithm?

A: The P&T algorithm has several advantages, including:

Relatively simple: The implementation of this algorithm is quite easy, so that it can be applied with relatively cheap components.
Easy to understand: The working principle is easily visualized and understood, so that it is easy in the process of debugging and development.

Q: What are the disadvantages of the P&T algorithm?

A: The P&T algorithm also has some disadvantages, including:

Convergence speed: This algorithm tends to be slow in achieving maximum power, especially in the condition of rapid load changes.
Risk of oscillation: P&T algorithm can cause output power oscillation, especially when close to the maximum power point.

Q: What is the maximum power achieved using the P&T algorithm?

A: The maximum power achieved using the P&T algorithm in this study was 1,8684 watts.

Q: What are the future research directions for the GTL technology?

A: Future research directions include:

Developing a more sophisticated MPPT algorithm: Developing a more sophisticated MPPT algorithm with a higher convergence speed and better stability is necessary to maximize the power produced by the GTL.
Developing more efficient GTL design: Developing a more efficient GTL design is necessary to increase the power of output and energy conversion efficiency.
Investigating the use of other MPPT algorithms: Investigating the use of other MPPT algorithms, such as the Incremental Conductance (IC) algorithm, is necessary to determine their effectiveness in maximizing power.

Q: What are the potential applications of the GTL technology?

A: The GTL technology has great potential to become an alternative energy source that is environmentally friendly and sustainable. It can be used in various applications, including:

Renewable energy systems: GTL can be used in renewable energy systems, such as solar and wind power systems, to maximize the power produced.
Industrial applications: GTL can be used in industrial applications, such as power generation and energy storage.
Transportation: GTL can be used in transportation, such as electric vehicles and hybrid vehicles.

Q: What are the challenges associated with the GTL technology?

A: The GTL technology has several challenges associated with it, including:

High cost: The GTL technology is still in its early stages of development, and the cost of implementation is high.
Complexity: The GTL technology is complex, and it requires sophisticated algorithms and control systems to operate efficiently.
Scalability: The GTL technology needs to be scaled up to meet the demands of large-scale power generation and energy storage.

Q: What are the future prospects of the GTL technology?

A: The future prospects of the GTL technology are bright, with several potential applications and benefits. The GTL technology has the potential to become a major player in the renewable energy market, providing a sustainable and environmentally friendly alternative to traditional energy sources.